Universitas Andalas - Research Directory

Study on the Effectiveness of Using Butterfly-Like Metallic Damper (BLMD) in Absorbing Dynamic Load Energy for the Front Landing Gear of an Unmanned Aerial Vehicle (UAV)
Fakultas Teknik
First Author: Satria E.
Authors: DENDI ADI SAPUTRA,EKA SATRIA,LOVELY SON,MULYADI BUR
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Leakage position detection in a straight pipe by using sound signals and a simple microphone
Fakultas Teknik
First Author: Huda F.
Authors: MEIFAL RUSLI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
The Use Of Castellated Beams in Earthquake-Resistant Buildings
Fakultas Teknik
First Author: Sunaryati J.
Authors: JATI SUNARYATI,MASRILAYANTI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Control Strategy for Power Stabilization of Pico-Hydro SEIG Systems with PID-Controlled Electronic Load Management in Rural Areas
Fakultas Teknik
First Author: Latif M.
Authors: MELDA LATIF,MUMUH MUHARAM,REFDINAL NAZIR,REFKI BUDIMAN
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Experimental study of head variations on the mechanical performance of a compressor as turbine (CAT)
Fakultas Teknik
First Author: Hizhar Y.
Authors: DENDI ADI SAPUTRA,UYUNG GATOT SYAFRAWI DINATA,YUL HIZHAR
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Reducing power losses of solar panels by cooling with heatsink arrays and aloe vera plants as heat absorbers
Fakultas Teknik
First Author: Suminto
Authors: UYUNG GATOT SYAFRAWI DINATA
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
The Influence of the Geometric Nonlinear Stiffness and Damping in the Quasi-Zero Stiffness Isolator Subjected to Shock Vibration with Varied Shock Period
Fakultas Teknik
First Author: Adriyan
Authors: LOVELY SON,MULYADI BUR,SYAMSUL HUDA
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Effect of Sintering Temperature on Graphene-Coated Stainless Steel (AISI 304) Electrodes Prepared by Electrophoretic Deposition for Enhanced Hydrophobicity in Water Electrolysis
Fakultas Teknik
First Author: Gunawarman
Authors: GUNAWARMAN,JON AFFI,OKNOVIA SUSANTI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Performance Assessment of Living Wall and Secondary Skin FaÃ§ades as Passive Cooling Strategies in Tropical Buildings
Fakultas Teknik
First Author: Saputra D.A.M.
Authors: DENDI ADI SAPUTRA,EKA SATRIA,HAZNAM PUTRA,LUSI SUSANTI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Performance comparison of the tracking and the static system of the aluminum foil reflector on parabolic point solar collector
Fakultas Teknik
First Author: Amin Z.
Authors: ZULKIFLI AMIN
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Mechanical strength study of polyester blend vinyl ester composite material reinforced by empty oil palm fruit bunch fibers as raw material for vehicle bumpers
Fakultas Teknik
First Author: Lazrisyah S.
Authors: HAZNAM PUTRA,ILHAMDI,NUSYIRWAN,RISPANDI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
The effect of thermal oxidation on the corrosion resistance of Î²-type titanium alloy Ti-29Nb-13Ta-4.6Zr (TNTZ) in simulated body fluid
Fakultas Teknik
First Author: Mansjur Z.
Authors: GUNAWARMAN
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Experimental Study of Determining the Dynamic Characteristics of a Composite Beam with the Addition of Elastomer Material
Fakultas Teknik
First Author: Siagian T.
Authors: LOVELY SON
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
A Comparative Analysis of Machine Learning Algorithms for Detecting Spindle Anomaly in DTY Machine: Optimized Random Forest vs SVM
Fakultas Teknik
First Author: Kurnia D.
Authors: AGUS SUTANTO,LOVELY SON
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Maximum stress and displacement of PP-PET hammers with various molding temperatures using the finite element method
Fakultas Teknik
First Author: Hendra
Authors: RISPANDI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Characteristics of a small seawater distillation dispenser with vacuum chamber for increasing fresh water production
Fakultas Teknik
First Author: Koswara E.
Authors: JON AFFI,UYUNG GATOT SYAFRAWI DINATA
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Experimental Characterization of a Sixteen-Bladed Hybrid FlettnerâSavonius Rotor
Fakultas Teknik
First Author: Habiburrahman N.
Authors: MEIFAL RUSLI,UYUNG GATOT SYAFRAWI DINATA
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Effect of Foaming in Lubricants on Tribological Properties and Surface Morphology of Sliding Contacts
Fakultas Teknik
First Author: Abdilah T.
Authors: DEDISON GASNI,DEVI CHANDRA
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Valorization of Corn Husk Waste into Citric Acid-Bonded Particleboards: Physical, Mechanical, and Acoustic Performance
Fakultas Teknik
First Author: Hanifi R.
Authors: GUNAWARMAN,JON AFFI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Prototype mold fabrication for the core and cavity of a MiFi product using a 700x350 CNC milling machine and SS400 steel
Fakultas Teknik
First Author: Herman P.M.
Authors: RISPANDI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Geometry-Driven Optimization of Hydrocyclone Performance in Salt Industry Applications: A CFD Study
Fakultas Teknik
First Author: Marno M.
Authors: GUNAWARMAN,IS PRIMA NANDA
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Effectiveness of Steel Ring Damper (SRD) to Absorb Energy and to Reduce Responses of Structure due to Dynamic Loading
Fakultas Teknik
First Author: Satria E.
Authors: EKA SATRIA,LOVELY SON,MULYADI BUR
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Synthesis of petroleum coke and coal tar pitch-based graphite with catalysts via pyrolysis: literature review
Fakultas Teknik
First Author: Arif S.
Authors: GUNAWARMAN
Q3 Conference Proceedin |Journal of Physics Conference Series
2026
Method of Increasing Anti-Cracking of Unsaturated Polyester by Adding Crude Palm Oil
Fakultas Teknik
First Author: Nusyirwan
Authors: HAZNAM PUTRA,RISPANDI
Q3 Conference Proceedin |Journal of Physics Conference Series
2026

Study on the Effectiveness of Using Butterfly-Like Metallic Damper (BLMD) in Absorbing Dynamic Load Energy for the Front Landing Gear of an Unmanned Aerial Vehicle (UAV)

Leakage position detection in a straight pipe by using sound signals and a simple microphone

The Use Of Castellated Beams in Earthquake-Resistant Buildings

Control Strategy for Power Stabilization of Pico-Hydro SEIG Systems with PID-Controlled Electronic Load Management in Rural Areas

Experimental study of head variations on the mechanical performance of a compressor as turbine (CAT)

Reducing power losses of solar panels by cooling with heatsink arrays and aloe vera plants as heat absorbers

The Influence of the Geometric Nonlinear Stiffness and Damping in the Quasi-Zero Stiffness Isolator Subjected to Shock Vibration with Varied Shock Period

Effect of Sintering Temperature on Graphene-Coated Stainless Steel (AISI 304) Electrodes Prepared by Electrophoretic Deposition for Enhanced Hydrophobicity in Water Electrolysis

Performance Assessment of Living Wall and Secondary Skin FaÃ§ades as Passive Cooling Strategies in Tropical Buildings

Performance comparison of the tracking and the static system of the aluminum foil reflector on parabolic point solar collector

Mechanical strength study of polyester blend vinyl ester composite material reinforced by empty oil palm fruit bunch fibers as raw material for vehicle bumpers

The effect of thermal oxidation on the corrosion resistance of Î²-type titanium alloy Ti-29Nb-13Ta-4.6Zr (TNTZ) in simulated body fluid

Experimental Study of Determining the Dynamic Characteristics of a Composite Beam with the Addition of Elastomer Material

A Comparative Analysis of Machine Learning Algorithms for Detecting Spindle Anomaly in DTY Machine: Optimized Random Forest vs SVM

Maximum stress and displacement of PP-PET hammers with various molding temperatures using the finite element method

Characteristics of a small seawater distillation dispenser with vacuum chamber for increasing fresh water production

Experimental Characterization of a Sixteen-Bladed Hybrid FlettnerâSavonius Rotor

Effect of Foaming in Lubricants on Tribological Properties and Surface Morphology of Sliding Contacts

Valorization of Corn Husk Waste into Citric Acid-Bonded Particleboards: Physical, Mechanical, and Acoustic Performance

Prototype mold fabrication for the core and cavity of a MiFi product using a 700x350 CNC milling machine and SS400 steel

Geometry-Driven Optimization of Hydrocyclone Performance in Salt Industry Applications: A CFD Study

Effectiveness of Steel Ring Damper (SRD) to Absorb Energy and to Reduce Responses of Structure due to Dynamic Loading

Synthesis of petroleum coke and coal tar pitch-based graphite with catalysts via pyrolysis: literature review

Method of Increasing Anti-Cracking of Unsaturated Polyester by Adding Crude Palm Oil

Experimental Characterization of a Sixteen-Bladed Hybrid FlettnerâSavonius Rotor